Boyd Lighting / Wall Lights / Plateau Round Exterior LED E10711/E10712
MADE IN
États-Unis
États-Unis
Cet article est également répertorié dans d'autres catégories.
Appliques Murales / Appliques Murales, Éclairage extérieur / Appliques Murales Extérieures, Boyd Éclairage / Boyd Appliques Murales
Détails du produit
Warm, ambient light glows from behind a plateau of bent brass. Add street or suite numbers to make a gorgeous destination. Designed by Deirdre Jordan. Choose from 10" or 14 diameters, mount them with the open end pointing up or down, and consider grouping in multiples for an artful installation.
Model:
art. E10711 (10")
Diameter (Body):cm.: 25.4 / inch. 10"
Depth: 3.2 / inch. 1.25"
Net Weight: 6 lbs (3 kg)
art. E10712 (14")
Height: cm.: 35.6 / inch. 14"
Depth: 3.2 / inch. 1.25"
Net Weight: 8 lbs (4 kg)
Performance: LED 6.3 watts, ~400 lumens Universal 120v-277
Color Temperature: 2700°k, 90+ CRI
3000°k and 3500°k color temperatures are available.
Material: Hand-finished brass
*Driver
The partially recessed driver requires a deep 31⁄2” octagonal j-box, or the driver must be mounted remotely.
Upcharges will apply for LED remote dimming dependant on your dimming system . Contact your local Boyd Rep.
Uses the Meanwell APV-8 driver.
Additional Information
For Signage, numbers, and lettering are available in the following fonts: Ariel, Century Gothic, Courier, Helvetica, and Times New Roman.
*Please note for exterior applications, the fixture must be oriented with the illumination pointing down. This fixture is only UL Wetlisted with the orientation of the illumination facing down.
Product Safety Assurance
All Boyd products have been tested and found in compliance by Underwriters Laboratory (UL) or an equivalent nationally recognized testing laboratory. Damp location fixtures are suitable for installation in: interior locations protected from weather but subject to moderate degrees of moisture, such as bathrooms; or protected locations under canopies, marquees and roofed open porches. Wet location fixtures are suitable for installation where the fixture is subject to saturation with water or other liquids, or where the fixture is mounted in an unprotected location and directly subjected to the weather.
Canadian Standards Certification (CSA) - Many products are UL certified to meet CSA standards. Please contact to clarify for details.
Americans with Disabilities Act (ADA)
Some wall sconces comply with the ADA requirements for public accessibility at any mounting height. Others must be mounted at minimum mounting heights to comply.
| Pays de fabrication | États-Unis |
|---|---|
| Style | Moderne et contemporain |
Document PDF
Collection "Plateau" par Boyd Lighting
Les clients ont aussi consulté
Callback