Inspired by trees and natural forms in nature. Designed by Doyle Crosby to rotate for multi-directional illumination which glows from behind silicon white diffusers.
Square tubes of hand-finished brass rotate for multi-directional illumination which glows from behind silicon white diffusers. The top arm rotates 180° and the lower arm rotates 90° to ensure they do not interfere with each other.
DRIVER The driver must be mounted remotely. The LED lamps standard in this fixture may be dimmed using 0-10V low-voltage dimming controls and wiring. Other systems to be quoted. Uses the Osram OT25W driver.
LAMPING (LED)
• 14 watts max • 2700 K or 3000 K, 90+ CRI • Universal 120-277 V • ~850 fixture lumens • Lamp included with fixture
All Boyd products have been tested and found in compliance by Underwriters Laboratory (UL) or an equivalent nationally recognized testing laboratory. Damp location fixtures are suitable for installation in: interior locations protected from weather but subject to moderate degrees of moisture, such as bathrooms; or protected locations under canopies, marquees and roofed open porches. Wet location fixtures are suitable for installation where the fixture is subject to saturation with water or other liquids, or where the fixture is mounted in an unprotected location and directly subjected to the weather.
Canadian Standards Certification (CSA) - Many products are UL certified to meet CSA standards. Please contact to clarify for details.
