Warm, ambient light glows from behind a plateau of bent brass. Add street or suite numbers to make a gorgeous destination. Designed by Deirdre Jordan. Choose from 6", 10" or 14 diameters, mount them with the open end pointing up or down, and consider grouping in multiples for an artful installation. For Signage, numbers, and lettering available in the following fonts: Ariel, Century Gothic, Courier, Helvetica, Times New Roman. Write in the comments of your order the necessary text for the lamp. Imagine having this elegant Plateu Round Sconce installed at the entrance of your home?! It would give the best first impression to your guests and neighbors!
3000°k and 3500°k color temperatures are available.
Material: Hand-finished brass
*Driver
The partially recessed driver requires a deep 31⁄2” octagonal j-box, or the driver must be mounted remotely. Upcharges will apply for LED remote dimming depending on your dimming system. Contact your local Boyd Rep.
Uses the Meanwell APV-8 driver
Product Safety Assurance
All Boyd products have been tested and found in compliance by Underwriters Laboratory (UL) or an equivalent nationally recognized testing laboratory. Damp location fixtures are suitable for installation in: interior locations protected from weather but subject to moderate degrees of moisture, such as bathrooms; or protected locations under canopies, marquees and roofed open porches. Wet location fixtures are suitable for installation where the fixture is subject to saturation with water or other liquids, or where the fixture is mounted in an unprotected location and directly subjected to the weather.
Canadian Standards Certification (CSA) - Many products are UL certified to meet CSA standards. Please contact to clarify for details.
Americans with Disabilities Act (ADA)
Some wall sconces comply with the ADA requirements for public accessibility at any mounting height. Others must be mounted at minimum mounting heights to comply.
