Hand-finished machined parts meet textured, cast parts in this oversized sconce inspired by railroad nails and the bark of trees. Choose from clear or inside etched glass shades, five finish options for the textured parts (Backplate, Spike and Cradle) and six for the machined parts (Arm and Backplate Frame). Companion to a single sconce and chandelier.
Available with different variations of finishes.
LAMPING
Incandescent for two, candelabra base, B-10, 40w max lamp (not included). Compatible with LED Screw-in lamps.
NOTES
• Backplate: 6” W x 5” H (15.2 x 12.7 cm) • Shade: 6.37” W x 4.62” H (16.2 x 11.7 cm) • Center of outlet box to top of fixture: 7” (17.8 cm) • For ADA compliance, height of center of outlet box above finished floor: 95.5” (242.6 cm) • UL listed (or equivalent) for damp locations
Product Safety Assurance
All Boyd products have been tested and found in compliance by Underwriters Laboratory (UL) or an equivalent nationally recognized testing laboratory. Damp location fixtures are suitable for installation in: interior locations protected from weather but subject to moderate degrees of moisture, such as bathrooms; or protected locations under canopies, marquees and roofed open porches. Wet location fixtures are suitable for installation where the fixture is subject to saturation with water or other liquids, or where the fixture is mounted in an unprotected location and directly subjected to the weather.
Canadian Standards Certification (CSA) - Many products are UL certified to meet CSA standards. Please contact to clarify for details.
Americans with Disabilities Act (ADA)
Some wall sconces comply with the ADA requirements for public accessibility at any mounting height. Others must be mounted at minimum mounting heights to comply.
